| Tend'r Rollers® |
Concept: The "Tend'r Rollers®" system provides the most innovative tender launching system in the marine industry today. With our system, there is no need to mount, dismount or store your outboard motor or gas tank. Using the manual 316 stainless steel hand winch, the system gently lowers your tender and outboard from your swim platform into the water, and away you go. Reverse this procedure and the tender and outboard are rolled onto Our "Tend'r Rollers®", system was designed by a boater, for boaters, with one thought in mind: to make it easy and effortless for launching and retrieving your tender and or sea doo. The "Tend'r Rollers®" system is designed to handle weight in three categories: Standard Light - 0-475 pounds; Standard Heavy - 0-750 pounds and custom - 0-1,200 pounds. However, the specifications of your transom or swim platform may be weight limited below the capabilities of the Tend'r Roller® system. You should confirm the weight limitations of your transom or swim platform to prevent overloading. Features: The system was designed to be adaptable for most types of vessels and can be removable only on our standard system. Engineered to be reversible, with the extra set of pads provided, you can launch or retrieve your tender from either port or starboard side of your swim platform. Be advised excessive weight of tenders and motors will affect the performance of your vessel, and can be a matter of safety. The recommended height from the water to top of your swim platform is 18" or lower. OPTIONAL QUICK RELEASE PADS ARE AVAILABLE (STANDARD SYSTEMS ONLY)
Just pull the pin, remove your Tend'r Roller® system and your swim platform
When your tender is stowed on our system , the outboard motor skeg is tucked in neatly between the two entry rollers. There are two stern straps with swivel snaps, a bow winch strap and a safety strap that will secure your tender. So there is no need for any other tie downs.
WITH OUR SYSTEM YOUR STERN VIEW IS UNOBSTRUCTED. Our system is in two parts, so that when your tender is launched, the center part of your swim platform is unobstructed. The water tight, threaded mounting pads are supplied with our system for fibreglass or wood swim platforms. Specifications: Constructed of 316 Marine Grade Stainless Steel, polished to a mirror finish, this unit provides the most durable and corrosion resistant "Tend'r Rollers®" System available to the boater. Installation: Installation of our Tend'r Rollers® system is a relatively simple process, easily undertaken by a qualified person. Simple step by step installation instructions with a full size drillpattern are enclosed with the system. Caution: While the Tend'r Rollers® system is inherently safe, if used correctly and according to instructions, Anchor Welding Inc. and Sea Weed Marine Products, manufacturers of the Tend'r Rollers® system will not be responsible for any personal injury or property damage however caused, including but not limited to, incorrect installation, overloading or improper use of the system or the boat or platform on which it is installed.US Patent No. 7,231,882 B2 Patent Pending - Canada Patent Pending - Europe Copyright © Anchor Welding Inc 2005 |
your swim platform.
